Stay Connected with Rhino Pumps
Don't forget to follow us by clicking the icons below!
Follow us on social media for the latest projects, innovations, and industry insights.
A tighter discharge limit usually shows up as paperwork, but if you have to treat the water to meet it, your pumps are part of the project.
Treatment adds head, so the duty point moves. Different chemistry can put your wetted materials out of service, and that means a different pump.
The compliance date is set by somebody who doesn't know your lead time, so start from the draft permit while there's still time to engineer.
Link in bio.
#npdes #wastewater #compliance #watertreatment #industrialwater
Most people don't read a pump warranty until the pump is on the shop floor. By then the answer was settled at submittal.
The clause that catches the most stations is operation outside the manufacturer's published operating region. Most stations haven't been checked against the curve since startup, and when a pump drifts out of its region, the file says the owner did it.
Every exclusion on the list is a failure the manufacturer has already seen, so it works as a maintenance checklist.
Veteran-owned. Link in bio.
#municipalwater #pumpspecification #publicworks #wastewater #procurement
Ever wonder where it goes after you flush?
We followed one flush through the three most common lift stations. Each one comes with its own problems for the crew that runs it.
Then we show how OverWatch does it without a wet well.
Two minutes. Worth it if you've ever cleared a ragged-up pump.
Link in bio.
@industrial_flow_solutions
#Wastewater #LiftStation #PublicWorks #WaterUtilities #Municipal
Those are some nice-looking STAKs you got there...
Rhino does everything from pump audits to full pump packages:
- Need a pump? We do that.
- Need a repair? We do that too.
- Need an audit to see why your pump is making that noise? You guessed it, we do that too.
- Need a service plan to keep your pumps in tip-top shape? That's us.
- Need a best friend? That's what most of our clients turn into.
We get it, the pumps are just part of your project. But we work with pumps all day. When things go south and projects don't go to plan, we face them head-on and make sure the job gets completed.
Ready to spend more time not worrying about your pumps and focus on the other 99 things you have to worry about?
#IndustrialPumps #PumpRepair #FluidHandling #CentrifugalPump #PumpMaintenance #Industrial #Engineering #Machinery #WaterPumps #PumpService #Manufacturing #Dewatering
Most systems have a pump that makes a noise nobody has tracked down yet. Here's what the common ones usually mean:
1. A bang when it shuts off is usually the check valve slamming.
2. A sound like gravel going through it is cavitation, and it's eating the impeller.
3. A growl that gets a little louder every month is often a bearing on its way out.
If one of yours has been making that noise for a while, we come out, check what could be going wrong, and leave you a report of what we found.
Happy Halloween from all of us at Rhino Pumps.
Link in bio.
#halloween #pumpmaintenance #wastewater #liftstation #pumptroubleshooting
The pump was never the long pole.
A pump package is a pump, a motor, a base, a panel and usually a drive. Different suppliers, different clocks, and your schedule assumed one clock.
Nothing gets released to manufacture until submittals are approved. Review time is not beside your lead time, it is in front of it.
Ask which items are longest. Ask if you can release them in parts. Both are free.
Link in bio.
#pumpstation #controlpanels #construction #procurement #leadtimes
"Rebuild if it's under half the price of new." That rule isn't from anywhere.
We looked for a published threshold from a standards body or a federal source. There isn't one. It is folklore that got repeated until it sounded official.
Purchase price is about 10 percent of what a pump costs you. Energy is about 40. So the smaller quote is not the answer. Cost per operating hour is.
Rebuild is often right. Just rarely for the reason people give.
Link in bio.
#pumprepair #industrialmaintenance #lifecyclecost #dewatering #reliability
Every collection system has one station with a nickname.
Goes off at 2am, gets cleared, runs eleven days, goes off again. Everybody in the field knows which one. It never has a root cause on paper, because clearing is not fixing.
Motor allowable starts per hour is a nameplate limit, not a suggestion. A station that exceeds it is not having random failures. It is being worn out on schedule.
Rank your stations by callouts over twelve months. One hour. Most utilities have never made that list.
Link in bio.
#liftstation #wastewater #publicworks #collectionsystem #operators
Your delivery is a range whether you specified for one or not.
A pump is efficient across a narrow band of flow. Pick one for a single number and it is excellent at that number and mediocre everywhere else. You pay for that every hour it runs.
Two smaller pumps you can stage beat one big pump you throttle down. Throttling is paying for pressure and then destroying it.
Link in bio.
#irrigation #agwater #vfd #pumpsizing #farming
The pump curve is a contract. Most bids treat it as a datasheet.
A pump selected to run inside the preferred operating region is still running in ten years. One parked out near the edge makes its numbers on startup day and then starts eating bearings and seals.
Ask for both regions marked on the certified curve for the impeller diameter actually being furnished. If they will not mark them, that tells you something.
Link in bio.
#pumpselection #pumpcurve #mechanicalcontractor #specifications #engineering
The most common thing we find isn't a failure. It's a pump still running.
Months past its rebuild interval, moving water every shift, so it stays in service. There is no alarm for "this is getting expensive."
Erosion in hard slurry service has been reported as high as 2 mm per day, and it is lowest at best efficiency point. Run off duty on abrasive service and that is a wear rate multiplier, not an energy penalty.
A pump that still runs is not the same as a pump that is fine.
Link in bio.
#dewatering #minewater #industrialpumps #miningmaintenance #pumprepair
Your lift station doesn't clog because of wipes.
It clogs because the pump is oversized, the floor is flat, and nobody picked the impeller.
Ninety seconds to empty the well means short run, long sit. Solids settle during the sit. Every cycle leaves a little more behind, and six months later only a vac truck clears it.
Wipes campaigns are cheap and they do not work. Geometry works.
Or you delete the wet well. No pit, nothing to settle into. Engineered to be left alone.
Link in bio.
#wastewater #liftstation #publicworks #wwtp #pumps
193°C. 3,500 PSI. 350 GPM.
That's what our pumps run at on the FORGE geothermal project. Geothermal Rising 2026 hits Houston September 20-23.
Find us at Booth 200 and enter to win a custom Rhino Pumps Benchmade (MSRP $350).
@levareofficial
@utahforgegeothermal
@geothermalrising
#Geothermal #GeothermalRising #GRC2026 #Benchmade #Giveaway
We need a Controls Engineer to run our panel shop in Pleasant Grove, Utah. If you know PLCs, UL 508A design, and can build a department from the ground up, read on.
Rhino Pumps is a veteran-owned pump company, 13 years in business, serving industrial and municipal markets. This role leads our controls engineering department. You will design panels, program PLCs, and own the shop.
Pay: $95,000 - $125,000 / year. In-office, Pleasant Grove, Utah.
Know someone good? Share this with them and have them put your name in the referral box on the application. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1010
#ControlsEngineering #PLCProgramming #HiringNow #UtahJobs #IndustrialEngineering
Rhino Pumps is hiring an Applications Engineer in Pleasant Grove, Utah. In-office role, $75,000 - $90,000 / year.
You will size and select pumps, build quotes, and back the sales team on every proposal. If you think in flow rates and system curves, we want to talk.
Rhino Pumps is a veteran-owned industrial and municipal pump company, 13 years in business and still growing.
Know someone who would be good at this? Send them the link and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1008
#RhinoPumps #PumpIndustry #EngineeringJobs #UtahJobs #HiringNow
We need someone who knows how to size a pump and build a quote.
Rhino Pumps is hiring an Applications Engineer in Denver, Colorado. This is an in-office role. You will size and select pumps, build proposals, and support the sales team with the technical depth they need to close deals. Pay is $75,000 - $90,000 / year.
Rhino is a veteran-owned pump company serving industrial and municipal customers for 13 years.
Know someone good? Send them this post and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1009
#pumps #engineeringjobs #denverjobs #hiringnow #rhinopumps
We are hiring a Technical Sales Engineer in Denver, Colorado. Base salary is $70,000 to $90,000 plus uncapped commission, and you get a company truck.
This is a field role. You will own a territory selling engineered pump systems to municipal and industrial customers for Rhino Pumps, a veteran-owned company that has been doing this work for 13 years.
If you know someone who can talk pumps, read a P&ID, and build real relationships with engineers and operators, send them this post and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1006
#TechnicalSales #PumpIndustry #DenverJobs #HiringNow #MunicipalWater
We are hiring a Technical Sales Engineer in St. George, Utah, and if you know pumps and know how to sell, this one is worth a look.
Rhino Pumps is a veteran-owned pump company with 13 years in the industrial and municipal market. This is a field territory role selling engineered pump systems to cities, utilities, and industrial facilities. You get a company truck, uncapped commission, and a base salary of $70,000 to $90,000.
Know someone who would be good at this? Send them the link and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1005
#pumps #technicalsales #salesengineer #hiring #municipalwater
We are hiring someone who can walk a job site, earn a customer's trust, and close.
Rhino Pumps is looking for a Technical Sales Engineer based in Pleasant Grove, Utah. This is a field and territory role selling engineered pump systems to municipal and industrial customers. You own your territory. You get a company truck, a base salary of $70,000 to $90,000, and uncapped commission.
Rhino Pumps is veteran-owned, 13 years in business, and still growing.
If you know someone who would be good at this, share this post with them and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1004
#hiring #salesengineer #pumps #utahjobs #industrialsales
If you can rebuild an engine, you can rebuild a pump.
Rhino Pumps is hiring an Industrial Mechanic / Pump Technician in Phoenix, Arizona. This is a shop and field role covering teardown, rebuild, and field service of industrial and municipal pumps. Pay is $28 - $35 / hour. Rhino is a veteran-owned company with 13 years in the pump business.
Know someone who would be a good fit? Share this with them and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1003
#industrialmechanic #pumptechnician #phoenixjobs #hiringnow #veteranowned
If you can rebuild an engine, you can rebuild a pump.
Rhino Pumps is hiring an Industrial Mechanic / Pump Technician in Caldwell, Idaho. This is a shop and field role: you will tear down, rebuild, and field-service industrial and municipal pumps. Pay is $28 - $35 / hour. We are a veteran-owned company, 13 years in business, and we do serious work.
Know someone solid? Share this with them and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1002
#industrialmechanic #pumptech #caldwellidaho #nowhiring #rhinopumps
If you can rebuild an engine, you can rebuild a pump.
Rhino Pumps, a veteran-owned pump company with 13 years serving industrial and municipal customers, is hiring an Industrial Mechanic / Pump Technician in Kirkland, Washington. Shop and field work. You will tear down, rebuild, and field-service pumps that keep water and industry moving. Pay is $28 - $35 / hour.
Know someone who would be great at this? Share this post with them and have them put your name in the referral box on the application so you get the credit. You do not have to work at Rhino to refer someone. 90 days after they start, two Benchmades get new owners.
https://www.rhinopumps.com/careers#RP-1001
#PumpTechnician #IndustrialMechanic #KirklandWA #VeteranOwned #NowHiring
We're hiring!
Rhino Pumps is growing, and we're looking for three Solution Engineers to join the team.
If you're passionate about solving problems, building relationships, and helping customers with engineered pump systems, we'd love to talk.
Open positions:
Pleasant Grove, Utah
https://www.indeed.com/cmp/Rhino-Pumps/jobs?jk=6d33504d6ce7d315&start=0&clearPrefilter=1
St. George, Utah
https://www.indeed.com/cmp/Rhino-Pumps/jobs?jk=6d33504d6ce7d315&start=0&clearPrefilter=1
Denver, Colorado
https://www.indeed.com/cmp/Rhino-Pumps/jobs?jk=282e2f790aeec607&start=0&clearPrefilter=1
Know someone who would be a great fit? Share this post or tag them in the comments.
#RhinoPumps #NowHiring #SalesEngineer #SolutionEngineer #EngineeringJobs #PumpSystems #IndustrialSales #UtahJobs #ColoradoJobs #WaterIndustry
Rhino Rewards — extended through July 31st. 🇺🇸
In honor of America's 250th, we're giving you one more month to earn a custom hat and unveiling the new tier two reward: the Custom Benchmade Mini Osborne.
$350 MSRP. Rhino exclusive. Not for sale anywhere.
Book a Lunch & Learn, a Performance Audit, or a follow-up meeting after a show → earn a hat.
Issue a qualifying PO by July 31st → earn the knife.
rhinopumps.com/rhinorewards
#RhinoRewards #RhinoPumps
Happy Independence Day from Rhino Pumps
Our offices will be closed Friday, July 3, 2026 in observance of Independence Day as our nation celebrates 250 years of freedom.
We’ll be back and ready to assist you with your projects on Monday, July 6.
Have a great holiday, and enjoy the peace and freedom this day represents with your friends and family.
— The Rhino Pumps Team 🦏
#usa250 #iIndependenceday #america
We love caffeine a little too much at Rhino Pumps, so I built a tracker for it.
(I'm not a doctor.)
Welcome to Caffeine PSI. (Pump related) it tracks your daily intake on a pressure gauge instead of a boring number.
Energy drinks, soda, coffee, dirty sodas, it's all in there. Pin your usuals as favorites and logging is one tap.
I already regret tracking my own. 567mg today.
Free, no login: https://www.rhinopumps.com/caffeine-tracker
#caffeine
Motors delivered and installed. Thirteen vertical turbine pumps are going in as part of a major water infrastructure build. Pump cans are set, motors are on, and the team is working through testing and final assembly.
Big project, great partners. Proud to be working alongside @wilo_usa
#RhinoPumps #VerticalTurbine #PumpInstallation #WaterInfrastructure #AmericanMarshPumps #ProgressInAction #ConstructionUpdate #WaterProjects #UtahInfrastructure
Your pump system is probably costing you more than you think.
Performance loss hides inside normal operation — until it doesn’t.
A Rhino System Performance Audit shows you exactly where your system stands today: efficiency gaps, downtime risk, energy waste, and what’s actually worth fixing.
If your system has never been benchmarked, there’s a good chance something is quietly costing you money right now.
Let’s find it before it finds you.
rhinopumps.com/performance-audit
#RhinoPumps #PumpAudit
Hosted Provo City at HQ for a Lunch & Learn on mechanical seals. 25 people, hands-on demo, real conversations, and everyone left with the latest Rhino hat.
Awesome crew. Thanks for spending the afternoon with us!
Want to schedule one for your team?
https://www.rhinopumps.com/rhinorewards
#RhinoPumps #LunchAndLearn #MechanicalSeals #MunicipalWater #ProvoCity
Another Overwatch Pump System in the books!
#29 is being installed as we post this.
(You could say we have installed a plethora of Overwatch pumps)
Field team is crushing it!
Reliability you can count on.
👉 Learn more at rhinopumps.com/overwatch
@industrial_flow_solutions
#RhinoPumps #Overwatch #PumpSystems
We don't just install and disappear.
A conduit break flooded this vault after we put in this 4 pump OverWatch® system.
We went back in and cleaned up what the sump pump couldn't get. Looks as good as the day we finished. 🦏
rhinopumps.com/overwatch
@industrial_flow_solutions
#RhinoPumps #OverWatch #Wastewater #LiftStation
This was going to be a wet well.
We got the call before the plans were done. Got in early, redesigned around OverWatch®, and even roughed in a future outlet on the left for when the area grows and needs more capacity.
This is what happens when you call us first. 🦏
rhinopumps.com/overwatch
@industrial_flow_solutions
#RhinoPumps #OverWatch #Wastewater #LiftStation
The Rhino Stampede: 3 shows. 3 knives. 3 states. One week.
We're on the road April 14–17, find us at:
WRRC in Tucson, AZ
APWA in Jackson Hole, WY
WEAU Annual Conference in St. George, UT (Booth 312).
Come talk turnkey design, engineered solutions, and expert service.
Oh and enter for a chance to win a custom Rhino Pumps Benchmade Bugout® knife (MSRP $300). One at each show.
See you out there. 🦏
#WRRC
#APWA
#WEAU
#RhinoPumps
#Benchmade
#Giveaway
If you’ve been to a show with Rhino Pumps, you know what comes with it.
More knives.
Next stops are both in Tucson, Arizona.
📍 RWAAZ Spring Conference
April 9 to 10
📍 WRRC Annual Conference
April 14 to 15
Stop by, talk pumps, and enter to win a custom Benchmade Bugout Rhino Style valued at $300.
Winner will be announced at each event. Must be at the show to enter.
@ruralwaterassociationofaz
#RhinoPumps #ArizonaWater #RWAAZ #WRRC #WaterInfrastructure #PumpSystems #WaterIndustry #ArizonaEvents #Giveaway
Big announcement: Introducing the all-new Mini RhinoStak desktop coffee machine.
Industrial-grade pumping technology, now in a size that fits on your desk.
Brews one perfect cup... repeatedly.
Supplies extremely limited — today only (April 1st).
Who wants one? Buy one here https://www.rhinopumps.com/april-fools
If you’ve seen Rhino Pumps at a show, you know what’s going on.
The knives are back.
Next stop is the IRWA Spring Conference in Boise, Idaho.
Stop by for your chance to win a custom Benchmade Mini Bugout Rhino Style valued at $300.
April 1 to April 3, 2026
Boise, Idaho
Come talk pumps, projects, and performance and get entered into the giveaway. Winner will be announced during the event. Must be present to enter.
@idahoruralwater
#RhinoPumps #IRWA #IdahoWater #WaterInfrastructure #PumpSystems #WaterIndustry #BoiseIdaho #Giveaway
Control is a pretty loose term...
Both of these panels technically "control" a pump.
But only one provides real time monitoring, diagnostics, and visibility into system performance.
The difference between control and insight is often the difference between preventing a failure and reacting to one.
What’s the first difference you notice?
KONTROL™ systems are part of our STAK modular pump packages, integrating automation, monitoring, and control into a complete pumping solution.
Learn more:
https://www.rhinopumps.com/kontrols
#PumpControl #IndustrialAutomation #PumpSystems #WaterInfrastructure #ProcessEngineering
Many pump failures don’t start with the pump.
They start with lack of system visibility.
Basic manual control panels only tell you one thing:
The pump is on.
They don’t tell you:
• Motor load
• System pressure
• Pump performance
• Early warning signs of failure
That’s why modern pumping systems are moving toward integrated monitoring and automation.
KONTROL™ pump control panels give operators real time system insight so issues can be detected before downtime occurs.
Learn More: https://www.rhinopumps.com/kontrols
#PumpControl #IndustrialAutomation #PumpSystems #WaterInfrastructure #ProcessEngineering
Where the Rhino logo shows up, a Benchmade knife giveaway usually isn’t far behind.
Next stop is the Arizona Agribusiness Roundtable in Tempe. @agribusinessarizona
Swing by our display for a chance to win a custom Benchmade Mini Bugout Rhino Edition valued at $300.
March 13, 2026
Salt River Project PERA Training and Conference Center
Tempe, Arizona
Come meet the team, talk pumps, and get entered into the giveaway.
Winner will be announced during the event. Must visit the display to enter.
#ArizonaAgriculture #WaterInfrastructure #Agribusiness #PumpSystems #WaterIndustry #RhinoPumps #ArizonaWater #Irrigation
“As a high end landscape contractor please heed my words. Rhino Pumps are second to none! They answer their phones, do what they say, and do it to perfection… They have helped my clients out without any headache countless times.”
In this industry, reliability isn’t just about equipment. It’s about the people you can count on when your customers are depending on you.
We’re proud to support landscape contractors, irrigation professionals, and system operators who need pump systems that work and partners who stand behind them.
Answer the phone. Do what you say. Get it right.
That’s the standard we hold ourselves to every day.
#PumpSystems #Irrigation #IndustrialPumps #WaterInfrastructure
“These guys are the best kept secret in the pump repair/service world. Very knowledgeable and highly qualified.”
Being called a “best kept secret” is a compliment… but our goal is to make sure the customers who need us know exactly where to find us.
At Rhino Pumps, we focus on what matters most: knowledgeable people, responsive service, and the attention to detail required to keep pump systems running reliably.
From repair and service to engineered pump systems, we’re proud to support the contractors, operators, and engineers who depend on their equipment every day.
#PumpSystems #PumpRepair #IndustrialPumps #WaterInfrastructure
“You can look but you will not find such perfection from a tightly run team striving for excellence…
They do it right the first time, every time.”
Perfection is the goal. Persistence is the reality.
The reality is that complex pump systems and infrastructure projects don’t always go perfectly the first time. What matters is the commitment to keep working until the system performs the way it should.
At Rhino Pumps, we keep showing up, solving problems, and standing behind the systems we support until they’re right.
Because when reliability matters, the details matter.
�#PumpSystems #IndustrialPumps #WaterInfrastructure #Engineering
If you’ve been to a trade show with Rhino Pumps, you already know the drill.
See the Rhino Pumps logo… there’s probably a Benchmade knife involved.
This time you’ll find us at the Utah Water Users Association Annual Workshop in St. George.
Stop by Booth 103 for your chance to win a custom Benchmade Mini Bugout Rhino Edition valued at $300.
March 16 to March 18, 2026
St. George, Utah
Booth 103
Come meet the team, talk packaged pump systems, and get entered into the giveaway.
Winner will be announced during the event. Must visit the booth to enter.
#UtahWaterUsers #WaterInfrastructure #WaterUtilities #PumpSystems #WaterIndustry #RhinoPumps #UtahEngineering
FORGE update:
Installation underway.
RhinoSTAK built for:
• Geothermal
• Municipal
• Industrial
• Mining
And everything in between.
One system. One accountable partner.
#RhinoPumps #RhinoSTAK #UtahFORGE #GeothermalEnergy #MunicipalWater #IndustrialSystems #MiningIndustry #Infrastructure
@utahforgegeothermal
The BENCHMADE winners are in!
MINEXCHANGE
Peter Jacobs
NWEA Annual Conference
Michael Rawlings
Rural Water Association of Utah
Trevor Brown
Congrats to all three of you on winning the custom Benchmade Mini Bugout Rhino Style.
More shows coming. More knives. More chances to win.
If you see Rhino Pumps on the tradeshow floor, stop by and enter.
#RhinoPumps #TradeShowSeason #Benchmade #Giveaway #WaterIndustry #MiningIndustry #PumpSystems #Infrastructure
@smecommunity @rwautah
3 shows. 3 knives. One week.
We are covering some serious ground this week and bringing the @benchmadeknifecompany giveaways with us.
📍 MINEXCHANGE
Salt Lake City, UT
February 22 to 25
Booth 1245 with Levare
@smecommunity
📍 Rural Water Association of Utah
St. George, UT
February 23 to 27
Booth 302 (mini stak debut)
@rwautah
📍 NWEA Annual Conference
Las Vegas, NV
February 23 to 25
If you are at any of these shows, come see us.
Let’s talk pumps, projects, and performance.
And do not forget to enter to win the custom Benchmade Mini Bugout Rhino Style.
#RhinoPumps #TradeShowSeason #MINEXCHANGE #RuralWater #NWEA #Benchmade #PumpSystems #WaterIndustry #MiningIndustry #Infrastructure #UtahBusiness #NevadaBusiness
Rhino Pumps is a proud distributor of Levare Pumps for mining, geothermal, and industrial applications.
That means Levare performance backed by local service, support, and design expertise from the Rhino team.
If you’re working in mining, geothermal, or heavy industrial environments and need reliable pump solutions with accountable support, we’re ready to help.
Learn more at www.rhinopumps.com
#RhinoPumps #Levare #MiningIndustry #GeothermalEnergy #IndustrialPumps #PumpSystems #Infrastructure #EnergyIndustry
We’ve been working on something awesome for the RWAU Annual Conference in St. George, Utah from February 23 to 27, 2026.
This “miniSTAK” is almost complete for its debut.
If you’re attending, stop by Booth 302 to talk pumps and enter our custom BENCHMADE Mini Bugout knife giveaway. You must be at the show to enter.
See you at RWAU. Rural Water Association of Utah
#RhinoPumps #RWAUAnnualConference #WaterIndustry #PumpSystems #MunicipalWater WaterInfrastructure Giveaway Benchmade StGeorgeUT TradeShowSeason
New RhinoSTAK going in in Northern Utah.
Every STAK is custom built for the project, and so are the options. We can handle as little or as much as you need, from fabrication to full turnkey delivery.
One team. One accountable partner. Built around your scope.
That’s the advantage of RhinoSTAK.
#RhinoPumps #RhinoSTAK #PumpSystems #WaterInfrastructure #UtahWater #IndustrialPumps #TurnkeySolutions
Are you heading to the NWEA 2026 Annual Conference? If so, we’ll see you in #LasVegas.
We’ll be at the NWEA 2026 Annual Conference in Las Vegas, Nevada, February 23 to 26 at the Tuscany Suites and Casino.
If you’re attending, stop by and talk with Alejandro and enter our custom @benchmadeknifecompany Mini Bugout giveaway. You must be at the show to enter.
Hope to see you at NWEA.
#RhinoPumps #NWEA2026 #NevadaWater #WaterIndustry #PumpSystems #MunicipalWater #WaterInfrastructure #Giveaway #Benchmade #LasVegasEvents #TuscanySuitesCasino
We’re headed to the RWAU Annual Conference in St. George, Utah from February 23 to 27, 2026.
If you’re attending, stop by Booth 302 to talk pumps and enter our custom @benchmadeknifecompany Mini Bugout knife giveaway. You must be at the show to enter.
See you at RWAU. @rwautah
#RhinoPumps #RWAUAnnualConference #WaterIndustry #PumpSystems #MunicipalWater #WaterInfrastructure #Giveaway #Benchmade #StGeorgeUT #TradeShowSeason
We’re heading to MINEXCHANGE 2026 Annual Conference in Salt Lake City, Utah (Feb 22–25, 2026) with Levare.
If you’re attending, stop by Booth 1245 to talk pumps and enter our custom Benchmade knife giveaway.
You must be at the show to enter. No checked bag needed. If you win, we’ll ship it to you.
Come see us at MINEXCHANGE.
@smecommunity
#RhinoPumps #Levare #MINEXCHANGE2026 #WaterIndustry #PumpSystems #Infrastructure #SaltLakeCity #Engineering #MunicipalWater
We’re headed to ERWoW this week, February 10–11, at the ilani Resort and Casino in Washington.
If you’re attending, stop by Booth 4A and see Darko to talk pumps and enter our custom @benchmadeknifecompany Mini Bugout Rhino Style knife giveaway.
You must be at the show to enter, and the knife will be given away at the end of the event.
See you at ERWoW.
#RhinoPumps #ERWoW #WashingtonWater #PacificNorthwest #PNWWater #WaterIndustry #PumpSystems #MunicipalWater #ilaniResort #PNWInfrastructure







































































































